1-7. THROUGH-HULL FITTINGS:
1-7-1 LIST OF THROUGH HULLS:
1 Sea water intake for galley sink (½ valve 1991)
1 Galley sink drain (1in valve 1991)
1 Forward Cockpit drain (1-1/4in valve 1993)
1 Aft Cockpit drain (1-1/4in valve 1993)
1 Engine sea water intake with strainer (½ valve1991)
1 Head intake (½ in valve 1991)
1 Head sink drain (3/4 in valve 1991)
1 Head discharge (1-1/4 in valve1993)
8 - total thru hulls and valves
1 Anchor well drain (no shutoff)
1 Engine exhaust (no shutoff)
1 Propane cylinder locker drain (½ no shutoff)
4 Bilge outlets (no shutoff)
7 - total above water line
Fig. 5 Detail of Thru-Hull Plan for a stock Yamaha 33
Guide to Numbers on Plan:
1. Anchor well drain (no shutoff)
2. Sea water intake for galley sink (½ valve 1991)
3. Galley sink drain (1in valve 1991)
4. Forward Cockpit drain (1-1/4in valve 1993)
5. Aft Cockpit drain (1-1/4in valve 1993)
6. Propane cylinder locker drain (½ no shutoff)
7. Engine sea water intake (½ valve1991)
8. Head intake (½ in valve 1991)
9. Head sink drain (3/4 in valve 1991)
10. Head discharge (1-1/4 in valve1993)
11. Engine exhaust (no shutoff)
12. Speed
13. None
14. Sounder transducer
15. Sink and Ice Box pump out, Whale Urchin Pump under sinks
16. Bilge, Inside Manual Henderson Chimp MK II Pump, under stairs
17. Bilge, Electric 2000 Rule Pump, Three way switch located over galley sink
18. Bilge, Cockpit Manual Henderson Chimp MK II Pump
19. Shaft Packing Gland, 1", Flax packing 3/16, Bearing 25 x 40 x 100 (see detail)
20. Removable block to de-mount rudder
1-8. MAST FITTINGS:
The Tall Rig is fitted with two sets of spreaders and a set of intermediate shrouds.
Additional fittings added to the rig include:
Tri colour mast head light
Deck light
Lighting rod, Forespar Lightning Master
Windex 15 wind indicator
2nd track for Tri Sail
Jib halyard winch, Lewmar 16 self tailing
Running back stays
Fittings to attach the shrouds changed from T- bar to eye ends
Fig. 6 Mast Fittings
1-9. BOOM FITTINGS
1-9-1. STANDARD RIG BOOM FITTINGS
Gooseneck Sheaves layout:
Stbd. Top empty
Middle #3 Reef
Bottom #1 Reef
Port Top #2 Reef
Middle Clew Outhaul
Bottom Flattening Reef
Fig. 7 Boom Fittings on Standard Rig
1-9-2. TALL RIG BOOM FITTINGS
Gooseneck Sheaves layout:
Stbd. Top empty
Middle Flattening Reef
Bottom #1 Reef
Port Top #2 Reef
Middle Clew Out haul
Bottom empty
Fig. 8 Boom Fittings on Tall Rig
1-10. STANDARD LIST OF ENCLOSEDITEMS
1 Mast assembly
2 Boom assembly
3 Main Sail with bag
4 Jib Sail with bag
5 Bow and Stern Pulpits with bolts
6 Life Lines and Stanchion with bolts
7 Miscellaneous as listed below:
A. Lines and Gear:
21) Main Sheet with blocks and shackles
22) Main sheet traveler adjustment lines
23) Jib Sheets 2
24) Reefing Lines 3
25) Reefing Points for main sail 10
26) Spinnaker Sheets with snap shackles 2
27) Spinnaker Fore guy with snap shackles
28) Cunningham hauler with blocks
29) Boom Vang assembly
30) Preventer Lines / blocks and bale on boom (2) (not standard, now fitted)
B. Fitting and Gear:
1) Block / shackle for spinnaker sheets 2 sets - (Two large snatch blocks for turning blocks and two smaller snatch blocks for rails)
2) Block / shackle for spinnaker pole foreguy
3) Genoa cars 2 (4 Genoa cars, 2 cars with loops and 1 with cleat)
4) Winch Handles 2 (5 Handles including one that has two direction ratcheting )
5) Cowl Ventilator 4 (1 ONLY as 2 replaced with dome ventilator)
6) Filler Cap Opener 1 (not included as not needed)
7) Boat Hook 1
8) Bilge Pump Handles 1 (3, additional Pumps)
9) Battens, 4 per set for main 1 (3 sets, one inside boom)
10) Rubber Bushing in mast deck ring 1
11) Rubber Mast Boot attached to the mast 1 (Replaced with self amalgamating tape)
12) Hose clamps, large for boot 2
13) Galley stove accessories 1 set
14) Lock and keys (1 set)
C. Engine
1) Starting Key 2
2) Starting Handle 1
3) Tool kit 1 set (not included)
4) Operation Manual 1
D. Owners Manual 1
NOTE: Items in brackets ( ) are changes from standard list in Manual to what is presently on the boat.