Atari ST Applications Center

(To the Atari)

(To the TV)

(Pictures seen from the front - NOT the solderside!)

13 PIN monitor contact MALE to the Atari
21 PIN SCART MALE to the TV

	Atari		TV
Sound out	1	-	2	Sound in right
Sound out	1	-	6	Sound in left + mono
Composite sync	2	-	20	Video in
RGB Green out	6	-	11	RGB Green in (connect via a 150 Ohm resistor)
RGB Red out	7	-	15	RGB Red in (connect via a 150 Ohm resistor)
+12 V	8	-	8	Audio/RGB switch
RGB Blue out	10	-	7	RGB Blue in (connect via a 150 Ohm resistor)
Vertical Sync	12	-	16	Blanking
Ground	13	-	17	Video ground
If you don't use the resistors the screen will "burn" becouse the Atari signal seems to be a bit to strong for a normal TV. If your SCART TV doesn't follow the CENELEC standard you could try to connect a small wire between pin 16 and pin 20.