SD GZero Z’Gok
Beginner Modeling Tutorial
What you need (this is a list of all materials needed for all my models so far, some may not be needed for this model please read the entire tutorial before you start):
Sidecutters
Needle files, fine or fine Sandpaper
Modeling Glue (Recommend Tamiya Extra Thin Cement)
Tamiya plastic modeling putty
Gunze Sangyo Mr.Color Thinner
Nail buffing stick (get it at any beauty salon, or supermarket)
toothpicks
A very fine paintbrush
White and Gray primer (any type, I use spray primer from Home Depot, found in
the canned paint section)
Masking tape (recommend Tamiya masking tape)
X-Acto knife and self healing mat
Acrylic paints (any type)
Rubbing alcohol (isopropyl alcohol)
Airbrush and Compressor
Flat or Semi-gloss topcoat spray
Fine tip ink marker (0.20mm or smaller)
Lead pencil
Fine tweezers
Of course you need a No.30 SD GZero Z’Gok for this tutorial